• Always inspect the clipper blades for noticeable signs of damage.
• Always inspect the trimmer blades before use to ensure they are free from hair, debris etc.
• Ensure the trimmer is sufficiently charged before use.
• For best performance use on clean hair that has been combed until tanglefree.
SELECTING A CUTTING LENGTH
The X3 PRO trimmer comes with 1 comb guide with 15 positions (1mm to 15mm) for crafting all types of beard and stubble + an integrated grooved dial that adjusts the trimming settings in 1mm steps. Simply turn the dial left to right / right to left to your desired cutting length setting.
The cutting lengths are displayed on the LED screen in ‘mm’. The length setting on the LED screen will change as you adjust the dial. GOOD TO NOTE: Always put the comb guide on BEFORE turning the trimmer on, and turn the trimmer off before removing it.
To remove the cutting guide, first adjust the cutting length to maximum (15 mm). With the trimmer switched off, slowly pull the comb guide upwards and away from the trimmer body to remove.
To replace the cutting guide, first adjust the cutting length to minimum (1 mm). With the trimmer switched off, clip on one side and then the other side of the comb guide. Use the grooved dial to select the desired cutting length.
USING THE LENGTH LOCK SYSTEM
The length-lock system ensures the comb guide does not slip in use and securely maintains your chosen length setting to guarantee an even cut.
Once you have chosen your desired cutting length you can activate the lengthlock system.
To lock the selected length in place press the button underneath the grooved dial control until the lock symbol appears. An LED with the symbol should appear.
To unlock the length control dial, press the button underneath the dial control until the lock symbol disappears and the unlock LED illuminates with the symbol appears.
IMPORTANT: Do not force the dial length control to adjust settings or apply unnecessary pressure to the comb guide when the switch is set to the length lock position as this may cause damage to the trimmer.
TRAVEL LOCK FEATURE
The X3 PRO trimmer comes with a travel lock feature which will lock the on/off button from turning on accidently.
To activate the travel lock, press and hold the on/off button for 3 seconds until a green lock symbol appears. After 3 seconds the green symbol will disappear however the trimmer will stay locked.
If you press the on/off button for less than 3 seconds the travel lock symbol will appear and flash and the trimmer will not turn on.
To de-activate the travel lock, press and hold the on/off button for 3 seconds, the trimmer will then switch on. The travel lock is now deactivated. When you place the unit in the charger, the travel lock is automatically deactivated.